BVXBB - ABLEBOND 463-1
- MSDS: BVXBB
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 463-1
- National Stock Number: 8040-00-947-5483
Product Identification
Product ID:ABLEBOND 463-1
MSDS Date:01/13/1989
FSC:8040
NIIN:00-947-5483
Kit Part:Y
MSDS Number: BVXBB
Responsible Party
RANCHO DOMINGUEZ, CA 90221
US
Emergency Phone: 310-764-4600
Info Phone: 310-764-4600
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: >60%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
DIETHYLENETRIAMINE
CAS: 111-40-0
RTECS: IE1225000
Fraction By Weight: <8%
OSHA PEL 1 PPM
ACGIH TLV: S, 1 PPM; 9394
RESORCINOL DIGLYCIDYL ETHER (RDE)
CAS: 101-90-6
RTECS: VH1050000
Fraction By Weight: <20%
4,4'-ISOPROPYLIDENEDIPHENOL (SARA III)
CAS: 80-05-7
RTECS: SL6300000
Fraction By Weight: <4%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS 2.57 GRAMS/KG (RDE)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALED:MAY BE HARMFUL, RESPIRATORY
IRRITATION. SKIN:EXTREME IRRITATION. MAY BE ABSORBED IN HARMFUL
AMOUNTS. CAN CAUSE SENSITIZATION (SYMPTOMS SIMILAR TO POISON IVY),
DERMATITIS, SKIN CANCER. EYE:BURN S, MAY BE PERMANENT. INGESTED:MAY
BE HARMFUL. CHRONIC-POSSIBLE LIVER & KIDNEY DAMAGE ON REPEATED
OVEREXPOSURE.
Explanation of Carcinogenicity:RESORCINOL DIGLYCIRYL ETHER IS LISTED BY
NTP & IARC. SEE INDIVIDUAL REPORTS FOR DETAILS.
Effects of Overexposure:EYES:SEVERELY IRRITATING, CORROSIVE.
SKIN:EXTREMELY IRRITATING. CAN CAUSE SENSITIZATION W/SYMPTOMS OF
POISON IVY. INHALATION:CAN CAUSE RESPIRATORY IRRITATION.
INGESTED:NO INFORMATION ABOUT SYMPTOMS O F INGESTION GIVEN BY MFR
ON MSDS.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN BY MFR ON
MSDS.
First Aid
First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL
ATTENTION. SKIN:WASH IMMEDIATELY WITH SOAP AND WATER. IF IRRITATION
PERSISTS, SEEK MEDICAL ATTENTION IMMEDIATELY. INGESTION:SEEK
MEDICAL ATT ENTION IMMEDIATELY AND SHOW INSERT CARD.
INHALATION:REMOVE TO FRESH AIR IMMEDIATELY.
Fire Fighting
Flash Point Method:COC
Flash Point:327F,164C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS CAN
BE TOXIC.
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING AND
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS.
Handling
Handling and Storage Precautions:STORE REFRIGERATED AT ALL TIMES. AVOID
CONTACT WITH SKIN, EYES AND CLOTHING. AVOID INHALATION OF VAPORS.
GOOD HOUSEKEEPING IS REQUIRED.
Other Precautions:THIS PRODUCT IS A MICROELECTRONIC CHIP ADHESIVE. AS
SUCH, IT WILL BE NORMALLY APPLIED IN VERY TINY DABS BY AUTOMATIC OR
SEMI-AUTOMATIC EQUIPMENT. IF THE USER EXERCISES REASONABLE CARE,
SKIN CONTACT SH OULD NOT OCCUR.
Exposure Controls
Respiratory Protection:A NIOSH APPROVED MASK FOR TOXIC DUST IS REQUIRED
IF CURED PRODUCT IS TO BE DRY SANDED OR GROUND.
Ventilation:USE ADEQUATE VENTILATION. LOCAL EXHAUST IS RECOMMENDED TO
CONTROL EMPLOYEE EXPOSURE. VENT CURING OVENS TO OUTSIDE.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELDS
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
HMIS RECOMMENDS AN EYE WASH STATION AND WASHING FACILITIES IN THE
AREA.
Work Hygienic Practices:FOLLOW GOOD INDUSTRIAL HYGIENE PRACTICES. A
SKIN BARRIER CREAM HAS BEEN FOUND EFFECTIVE.
Supplemental Safety and Health
MSDS ENTERED INTO THE HMIS BY DGSC AT REQUEST OF GSA.
Chemical Properties
HCC:N1
NRC/State Lic Num:NONE
Vapor Pres:1 MM
Vapor Density:>1
Spec Gravity:3.2
Solubility in Water:SLIGHT
Appearance and Odor:SILVER PASTE WITH AMINE ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:NO
STRONG OXIDIZING AGENTS, ACIDS.
Stability Condition to Avoid:HEAT PRIOR TO CURE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN, ALDEHYDES.
Conditions to Avoid Polymerization:EXCESSIVE HEAT. IF PRODUCT NOT USED
FOR THIN BOND LINE APPLICATION, VIOLENT CHEMICAL REACTION CAN
RESULT.
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES WITH ALL FEDERAL, STATE & LOCAL
REGULATIONS. HMIS:NOTE THAT PRODUCT CONTAINS A LARGE QUANTITY OF
METALLIC SILVER. RECOVER IF A PPROPRIATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.